上海交换机报价网 021-51871121
   主营:电话交换机,集团电话,程控交换机批发,零售,安装,调试,维护,扩容,维修,保养及周边配套产品和通信语音设备服务,电脑话务员,语音信箱,综合布线,线路整改,IP长途电话,门禁考勤,监控系统。

服务永不止尽、诚信高于一切!

 

设为首页

 

网站地图

首页
公司介绍
企业宗旨
产品展示
工程案例
售后服务
联系方式
产品维修
集团电话

SIEMENS,西门子交换机,西门子集团电话西门子电话交换机

PANASONIC,松下交换机,松下电话交换机松下程控交换机

NEC交换机,NEC电话交换机,NEC集团电话NEC集团电话

SAMSUNG,三星交换机,三星程控交换机三星集团电话
TECOM,东讯交换机,东讯电话交换机东讯电话交换机
TOSHIBA,东芝交换机,东芝集团电话东芝电话交换机
ERICSSON,爱立信交换机,爱立信数字集团电话爱立信程控交换机
ALCATEL,阿尔卡特交换机,阿尔卡特呼叫中心阿尔卡特集团电话
AVAYA交换机,AVAYA集团电话AVAYA集团电话
NORTEL,北电交换机,北电程控交换机北电程控交换机
WS交换机,国威集团电话国威集团电话
华亨交换机,华亨集团电话华亨电话交换机
ZLTELECOM,中联交换机,中联集团电话中联电话交换机
TCL,TCL交换机,TCL电话交换机TCL电话交换机
交换机维修,程控交换机维修,集团电话维修电话交换机维修
电脑话务员,自动总机电脑话务员
语音信箱,留言系统语音信箱

录音设备,集团电话录音录音系统

计费系统,交换机计费计费系统

综合布线综合布线

IP电话,IP主叫IP电话
交换机租赁,集团电话出租电话交换机租赁
门禁考勤门禁考勤
监控系统监控系统
网络设备网络设备

上海电话交换机网免费为广大用户提供各种程控电话交换机,集团电话,数字IPPBX,通信系统,PC产品,系统集成及配套设备技术资料,安装说明书,功能说明书,操作指南,编程手册,**郑重声明,所有信息仅供参考!**

西门子HIPATH1100系列电话交换机系统功能代码及编程说明书项目:

Programmed Function Code Default Settings
Important settings 􀃆 page 21
Dialing mode on an analog trunk 􀃆 page 24 119 2 (MF) for analog lines
Default access to a group of external
lines 􀃆 page 24
002 0 for all extensions
Analog line attendants 􀃆 page 25 142 None
Phonebook/Speed Dial 􀃆 page 27 112 All slots are empty
Denied list 􀃆 page 28 123 Default permission and
denied lists 􀃆 page 30
Permission list 􀃆 page 29 124
Permission for using speed dial numbers without
COS analysis 􀃆 page 33
072 # (deactivated)
Assigning a class of service (COS) 􀃆 page 33 111 77 (for all extensions)
Special class of service for a blocked
extension 􀃆 page 34
096 0 (for all extensions)
COS changeover 􀃆 page 35 178 # (blocked)
Language 􀃆 page 21 164 3 (for all systems)
Country/group of countries 􀃆 page 21 165 01(Brazil)
Attendant console 􀃆 page 36 150 None
Carrier selection mode: LCR or ACS 􀃆 page 37 225 * (activated)
Warning tone for calls without LCR 􀃆 page 37 092 # (deactivated)
Activating the time for LCR fallback 􀃆 page 39 250 # (deactivated)
Time for LCR fallback 􀃆 page 39 251 05 seconds
External line settings 􀃆 page 41
Groups of external lines 􀃆 page 41 156 0 (access to all lines)
Overflow for a group of external lines 􀃆 page 41 099 1 - First
2 - All
3 - None
Summary of programming codes
208
Seizure priority by type of external line 􀃆 page 43 194 1 (standalone)
Analog trunk seizure protocol 􀃆 page 43 017 2 - Canada
1 - Other countries
Caller ID - CLIP - for analog lines 􀃆 page 44 005 Depending on the country
External line call direction 􀃆 page 46 155 1 - bidirectional
Flash duration on analog line 􀃆 page 46 118 Depends on codes
"119" and "165 "
Reseizure timeout for an external line 􀃆 page 47 129 1 (0.5 seconds)
Maximum time between rings for an incoming
call 􀃆 page 47
117 13 - Argentina
04 - Korea
06 - Other countries
Coefficient for an analog trunk 􀃆 page 48 147 1 (for all lines)
Type of answering signal 􀃆 page 49 158 # (deactivated)
Dial tone detection 􀃆 page 50 160 * (activated)
Operation as Satellite PABX
External line connection. 􀃆 page 51
133 1 - For a public exchange
Operation as Satellite PABX
Second external access code 􀃆 page 51
134 0
False tone 􀃆 page 52 063 # (deactivated) - Argentina,
Korea and India
*(activated) - Other countries
Internal access code for automatic
seizure 􀃆 page 52
226 Depending on the country
External analog present 􀃆 page 53 079 * (activated)
Waiting time for a second attendant to answer a call
on an external analog line 􀃆 page 54
083 06 (30 seconds)
Programming an extension 􀃆 page 54
Group configuration by menu 􀃆 page 20 258 None
Change first digit of all dial tables 􀃆 page 54 255 None
Changing extension number to another
number 􀃆 page 55
256 None
Programmed Function Code Default Settings
Summary of programming codes
209
Changing the extension number to another number
via physical address 􀃆 page 56
257 None
Programming executive/secretary
function 􀃆 page 57
253
254该技术资料有张亮整理,全国提供上门故障检测,维修,调试,设置服务,欢迎合作。
None
Pickup groups 􀃆 page 60 143 None
Call groups (CG) 􀃆 page 61 13 First 10 extensions
Call forwarding within a Call group (CG) 􀃆 page 62 222 # (deactivated)
Alert ring timeout for Pickup groups 􀃆 page 60 035 * (deactivated)
Callback/urgent call activation
for timeout 􀃆 page 78
037 # (deactivated)
Caller ID by name/number 􀃆 page 78 039 1 - Name and number
UCD subscriber groups 􀃆 page 64 023 None
Collect call barring for a UCD subscriber
group 􀃆 page 65
007 # (deactivated)
Message waiting for UCD queue 􀃆 page 66 024 External music source
UCD queue size 􀃆 page 66 025 99 slots
Time for message waiting connection to a UCD
queue 􀃆 page 67
026 00 (0 seconds)
UCD overflow call destination 􀃆 page 67 027 None
Round-robin Distribution of Calls to
agents 􀃆 page 68
028 * (activated)
Time for agent’s Notes 􀃆 page 69 029 00 (0 seconds)
Ring Signal Timeout for agents 􀃆 page 69 030 06 (30 seconds)
Agent status after signaling timeout. 􀃆 page 70 176 # - unavailable
Cascaded call forwarding partner 􀃆 page 71 181 0 - Last
Time in a UCD queue 􀃆 page 72 031 12 (1 minute)
Waiting message before signaling a UCD
call 􀃆 page 72
032 # (deactivated)
Minimum time for UCD queue on hold
message 􀃆 page 73
033 01 (5 seconds)
Programmed Function Code Default Settings
Summary of programming codes
210
Hunt groups (HG) 􀃆 page 74 021 None
Call forwarding within a Hunt group
(HG) 􀃆 page 76
242 04 (20 seconds)
Search Mode for Hunt groups 􀃆 page 75 022 1 - Linear
Override 􀃆 page 78 44 0 - No permission
Silent monitoring 􀃆 page 79 046 # (deactivated)
Caller ID for analog extension (CLIP) 􀃆 page 80 010 0 - for all extensions
3 - for all extensions (Korea)
5 - for all extensions
(France FT)该技术资料有张亮整理,全国提供上门故障检测,维修,调试,设置服务,欢迎合作。
Electronic lock password 􀃆 page 81 126 00000
Timeout for call forward no answer 􀃆 page 82 130 6 (30 seconds)
Conditional forwarding limited by
extension 􀃆 page 83
097 5
External CFW 􀃆 page 84 098 # (deactivated)
Permission for conditional call
forwarding 􀃆 page 85
247 * (activated)
Dialing mode 􀃆 page 86 168 0 - Automatic identification
Flash detection time 􀃆 page 86 131 035: Portugal, Argentina
and Thailand
036 - Korea
028: Other countries
Overflow extension 􀃆 page 87 132 1 - no answer = none
2 and 3: the first extension
on the system
Hotline 􀃆 page 88 145 None
Warmline 􀃆 page 89 162 0 seconds
Assigned group 􀃆 page 90 151 None
CD interface assignment 􀃆 page 90
(for system telephones)
146 HiPath 1120/1150:
1st - 11, 2nd - 12, ... etc.
HiPath 1190: None
Programmed Function Code Default Settings
Summary of programming codes
211
Extension coefficient 􀃆 page 91 148 1
Activating external message waiting
indicator 􀃆 page 92
014 # (deactivated)
External MWI group 􀃆 page 93 015 None
Waiting Message Server Number 􀃆 page 93 065 None
Collect call barring by extension 􀃆 page 94 193 # (deactivated)
Type of equipment connected to the
extension 􀃆 page 95
003 0 - Normal (telephone)
Auto-answering mode 􀃆 page 95 034 # (deactivated)
Pulses for call charges on an analog
extension 􀃆 page 96
041 # (deactivated)
Timer for outgoing external calls 􀃆 page 97 047 36 - (180 seconds)
Activate/Disable timer for outgoing external
calls 􀃆 page 97
048 # (deactivated)
Activate/Disable timeout for external
calls 􀃆 page 98
239 # (deactivated)
Defining timeout for external calls 􀃆 page 99 240 0
Day to begin timeout 􀃆 page 99 241 *(deactivated)
Answering timeout for a second attendant for calls
received over an analog trunk 􀃆 page 100
082 06 (30 seconds)
Modem extension 􀃆 page 101 085 None
MSN and extension assignment for external outgoing
calls 􀃆 page 100
086 None
External-to-external transfer 􀃆 page 101 091 # (deactivated)
Elapsed timeout for external-to-external
connection 􀃆 page 102
218 # (deactivated)
Configuring a timeout for an external-to-external
connection 􀃆 page 102
219 1 hour
Disconnect timeout after and external-to-external
transfer 􀃆 page 103
183 300 seconds
Programmed Function Code Default Settings
Summary of programming codes
212
Code to disconnect timeout after external-to-external
transfer 􀃆 page 103
184 00该技术资料有张亮整理,全国提供上门故障检测,维修,调试,设置服务,欢迎合作。
Transfer when extension is busy 􀃆 page 104 217 * (activated)
Automatic Seizure of an external line 􀃆 page 104 036 # (deactivated)
Hide group prefix 􀃆 page 81 188 # (deactivated)
DISA 􀃆 page 105
DISA permission 􀃆 page 106 018 # (deactivated)
MSN DISA 􀃆 page 106 019 None
DISA external line 􀃆 page 107 020 1 - Never
General settings 􀃆 page 108
Music on Hold 􀃆 page 108 136 3 - Internal
Assigning extensions to MOH groups 􀃆 page 108 087 None
Music source for the MOH group 􀃆 page 109 088 0 - No music
Music source extension 􀃆 page 109 089 None
External music source - extension
assignment 􀃆 page 110
064 None
Setting the time for an external room
monitor 􀃆 page 112
169 10 seconds
Interdigit pause time setting 􀃆 page 112 227 2 seconds
Types of caller lists 􀃆 page 113 049 2 - Internal and external
Deleting digits from the caller list 􀃆 page 113 171 None
Date/time - manual setting 􀃆 page 114 114 DD.MM.YY HH:MM
Automatic update of date/time 􀃆 page 115 038 * (activated)
Callback for external calls via ISDN 􀃆 page 115 221 * (activated)
Call charge unit 􀃆 page 116 195 Slot 0, Factor 00001
Multiplier for call charge factor 􀃆 page 116 042 001 - Value 1
Call charge factor for extensions 􀃆 page 117 043 1 - Default
Call charge value by extension 􀃆 page 117 197 Slot 0, Factor 00001
Programmed Function Code Default Settings
Summary of programming codes
213
Call cost limit for an extension 􀃆 page 118 044 # (deactivated)
Date for updating the call cost limit for an
extension 􀃆 page 118
045 * (deactivated)
Sw information 􀃆 page 119 001
Local SW update 􀃆 page 119 060
Activating a software update 􀃆 page 119 055 # (deactivated)
Day for SW Update 􀃆 page 121 054 Day 01
Time for SW Update 􀃆 page 121 058 00:00
External number for updating the
software 􀃆 page 121
056 None
Frequency for SW Update 􀃆 page 122 057 01 - Monthly
Uploading the SW update 􀃆 page 122 059 00:00
Setting a System Password 􀃆 page 123 180 31994
Night service password 􀃆 page 123 149 31994
Restoring Default Settings 􀃆 page 124 199
HiPath 1120 Alarms 􀃆 page 124
Emergency numbers 􀃆 page 125 040 190 and 193 (Brazil)
Module Detection 􀃆 page 126 061 00 - all slots
Service call 􀃆 page 127 *994
Remote software update 􀃆 page 127 *9415
Remote operation mode 􀃆 page 128 084 1 - Via ISDN
Activating remote administration 􀃆 page 128 066 # (deactivated)
External number configuration 􀃆 page 128 067 None
remote administration password 􀃆 page 129 068 None
Remote MSN 􀃆 page 129 069 None
Without MSN verification 􀃆 page 130 070 # (deactivated)
Remote administration via dtmf 􀃆 page 130 157 * (activated)
Programmed Function Code Default Settings
Summary of programming codes
214该技术资料有张亮整理,全国提供上门故障检测,维修,调试,设置服务,欢迎合作。
Ending remote administration 􀃆 page 131 196
Type of MSN signal 􀃆 page 132 073 Type 1
Assigning a temporary MSN 􀃆 page 132 093 None
MSN identification mode 􀃆 page 133 224 None
Remote administration password through an
MSN 􀃆 page 133
220 None
Delete disconnected consoles 􀃆 page 134 166 None
PABX Trace log 􀃆 page 135 246 None
Entrance telephone 􀃆 page 136
Configuring an internal entrance
telephone 􀃆 page 136
115 # (deactivated)
Internal entrance telephone
Door lock 􀃆 page 137
116 # (deactivated)
Internal entrance telephone
DIDs for entrance telephones 􀃆 page 137
159 Extension 11/101
Internal entrance telephone
Permission to open the door 􀃆 page 138
125 All extensions
Report 􀃆 page 140
Ticket account codes 􀃆 page 144 095 # (deactivated)
Account code type 􀃆 page 145 243 1 - optional
Account code confirmation 􀃆 page 145 244 # (deactivated)
Data transmission rate 􀃆 page 146 120 3 - 19200 baud
25-digit suppression in CDR records 􀃆 page 146 121 0
Call detail report for incoming calls 􀃆 page 147 161 1 - Outgoing/Incoming
Call detail report filter 􀃆 page 148 167 None
Call detail report through serial
interface 􀃆 page 148
006 # (deactivated)
Fax/DID 􀃆 page 149
Answering menu 􀃆 page 150 009 None
Programmed Function Code Default Settings
Summary of programming codes
215该技术资料有张亮整理,全国提供上门故障检测,维修,调试,设置服务,欢迎合作。
Recording a greeting 􀃆 page 151 137
Call answering mode Configuration 􀃆 page 153 127 0 - For all external lines
Fax reception extension 􀃆 page 154 128 None
Collect call barring for Fax/DID 􀃆 page 155 008 # (deactivated)
MSN Answering for Fax/DID 􀃆 page 156 080 0 - Module is deactivated
Fax extension for MSN 􀃆 page 156 081 None
Releasing Fax/DID after a timeout 􀃆 page 157 094 06 (30 seconds)
Digital trunk settings 􀃆 page 158
S0 ports 􀃆 page 159 062 1 - External line and extension
Operation Mode for S0 Line 􀃆 page 160 190 1 - For the first PP port
3 - For all others: S0 BUS
Symmetric/Asymmetric Call 􀃆 page 161 074 * (activated)
No ACK Setup for S0 line 􀃆 page 161 075 # (deactivated)
Notify 􀃆 page 162 076 * (activated)
Automatic Keypad 􀃆 page 163 077 # (deactivated)
Assigning a digital line to an MSN 􀃆 page 163 078 All assigned
External line prefix 􀃆 page 170 189 None
External number registration 􀃆 page 170 191 None
Assignment of an MSN to attendants 􀃆 page 171 192 None
Busy signal 􀃆 page 173 004 None
Local area code filter 􀃆 page 174 011 None
Country area code filter 􀃆 page 174 012 55 - Brazil
Call deflection 􀃆 page 164 229 # (deactivated)
ISDN Layer 1 􀃆 page 165 101 Depending on the country
ISDN Layer 2 􀃆 page 166 102 Depending on the country
B Channel 􀃆 page 166 103 Depending on the country
Programmed Function Code Default Settings
Summary of programming codes
216该技术资料有张亮整理,全国提供上门故障检测,维修,调试,设置服务,欢迎合作。
"No DIV.LEG info" for ISDN line 􀃆 page 167 249 Depending on the country
ADSL expansion boards 􀃆 page 175
Default configuration of the LAN
interface 􀃆 page 177
013 ADSL module
IP 10.0.0.1
SLIMC, SADSLIM, LIMC
and ADSLIM modules
- IP of the modem:
192.168.254.254
-IP of the module:
192.168.254.253
EVM module 􀃆 page 177
Duration of greeting messages 􀃆 page 178 200 02
Mailbox language 􀃆 page 179 201 06 for Brazil and Portugal
Max. number of auto-configurable
mailboxes 􀃆 page 180
202 12
Mailbox assignments 􀃆 page 181 203 None
Mailbox password 􀃆 page 181 204 1234
Enabling mailbox recording 􀃆 page 182 205 # (deactivated)
Type of greeting for a mailbox 􀃆 page 182 206 1
Mailbox greeting configuration 􀃆 page 183 207 1
Message source 􀃆 page 183 208 None
Message mode 􀃆 page 184 209 1
Message for MSN 􀃆 page 184 210 None
System number 􀃆 page 184 211 None
Type of system number 􀃆 page 185 212 1- Other countries
3- Italy
Type of voice mail 􀃆 page 185 214 1
Voice mail group 􀃆 page 186 215 None
Mailbox assignment for auto-answering
mode 􀃆 page 186
216 None
Programmed Function Code Default Settings
Summary of programming codes
217
Audio quality 􀃆 page 186 228 2
Greeting for an analog trunk 􀃆 page 187 230 None
Relay and sensor on the HiPath 1120 􀃆 page 188
Sensor function configuration 􀃆 page 188 170 0 - deactivated
Sensor activation logic 􀃆 page 189 174 0 - NC
Time between attempts for activating the
sensor 􀃆 page 189
050 03 (3 minutes)
MSN Assignment for the Sensor 􀃆 page 190 051 None
Number dialed by sensor activation 􀃆 page 190 052 None
Number of attempts for activating the
sensor 􀃆 page 191
053 001 (1 attempt)
DTMF signals for the sensor 􀃆 page 191 177 None
Sensor message 􀃆 page 192 213 None
Relay 􀃆 page 192 175 Switch
Timer to deactivate the relay 􀃆 page 193 173 002 (1 second)
External Ring for Activating the Relay 􀃆 page 193 071 None
Programmed Function Code Default Settings

该技术资料有张亮整理,全国提供上门故障检测,维修,调试,设置服务,欢迎合作。

 

更多电话交换机集团电话,呼叫中心解决方案,安装,调试,维修,扩容,升级,移机,设置,编程,维护,租赁等服务请来电,公司有专业工程师为您上门解决一切疑问故障,24小时服务专线:021-51871121

关于我们    电话交换机    集团电话维修    程控交换机报价   交换机知识    综合布线    监控系统    门禁监控    联系我们
版权所有:上海电话交换机报价网    电话:021-51871121     沪ICP备:09051106号